Reset; Resetting The Pc Via Windows 98; Resetting The Pc Via Windows Nt - Fujitsu 5000 Series User Manual

3 Reset

The PC is reset after the operating system in configured or if software fails to run normally. This
section explains how to reset the PC.
Point
Resetting the PC results in memory data being lost. Before resetting, save all necessary data.

Resetting the PC via Windows 98

This section explains how to reset the PC via Windows 98.
1
Click [Start] and "Shut Down."
The "Shut Down Windows" dialog box appears.
2
Select "Restart the computer?" and then click [OK].
The PC is reset.
Point
If Windows 98 does not respond to the keyboard or mouse, reset the PC as follows:
1 Press [Ctrl] + [Alt] + [Delete].
The "Close Program" dialog box appears.
Follow the instructions in this dialog box.

Resetting the PC via Windows NT

This section explains how to reset the PC via Windows NT.
1
Click [Start] and "Shut Down."
The "Shut Down Windows" dialog box appears.
2
Select "Restart the computer?" and click [Yes].
The PC is reset.
Point
The following procedure can also be used to reset the PC:
1 Press [Ctrl] + [Alt] + [Delete].
The "Windows NT Security" dialog box appears.
2 Click [Shut Down].
The "Shut Down Computer" dialog box appears.
3 Select "Switch off power after shut down?" and click [OK].
The PC is reset.
12