Wired Lan; Wireless Lan - BenQ MW870UST User Manual

FUNCTION
Standby
Settings
Network
Settings
Reset All
Settings
DESCRIPTION
Network
Selecting On enables the function, and the projector can be
monitored or controlled over a network when it is in standby mode.
Microphone
Selecting On enables the function, and the microphone can be used
even in standby mode
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 and
MONITOR OUT jacks are correctly connected to devices. See
"Connecting a monitor" on page 23
Enabling this function slightly increases the standby power
consumption.
The Monitor Out only works when an appropriate D-Sub input is
made to the COMPUTER 1 jack.

Wired LAN

See "Controlling the projector through a LAN environment" on page
46 for details.

Wireless LAN

See "Controlling the projector through a LAN environment" on page
46 for details.
Remote Desktop
See "Displaying image through Q Presenter" on page 56
Projection Log in code
See "Using the Projection Login Code" on page 60
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings, Baud Rate.
for how to make the connection.
for details.
for details.
Operation
79