Controls And Functions - BenQ MW870UST User Manual

Controls and functions

Projector
1
2
3
4
5
2
1. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
2. Keystone/Arrow keys (
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 30
details.
3. Left/
Starts the FAQ function. See
FAQ function" on page 43
4. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page 37
for details.
Activates the selected On-Screen Display
(OSD) menu item. See
on page 31 for details.
5. BLANK
Used to hide the screen picture. See
"Hiding the image" on page 42
6
7
8
9
10
11
/ Up, /
for
"Utilizing
for details.
"Using the menus"
for details.
6. AUTO
Automatically determines the best
picture timings for the displayed image.
See "Auto-adjusting the image" on page
29 for details.
7. Power/POWER indicator light
I
I
Toggles the projector between standby
mode and on.See
projector" on page 28
Lights up or flashes when the projector is
under operation. See
page 87 for detail.
8. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 87
9. Right/
When the On-Screen Display (OSD)
menu is activated, the #2, #3, and #9
keys are used as directional arrows to
select the desired menu items and to
make adjusents. See
on page 31 for details.
Activates panel key lock. See
control keys" on page 43
10. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 87
details.
11. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 34
details.
"Starting up the
for details.
"Indicators" on
for details.
"Using the menus"
"Locking
for details.
for
for
Introduction 11