Magnifying And Searching For Details - BenQ MW870UST User Manual

Hide thumbs Also See for MW870UST:
Table of Contents

Advertisement

In the unlikely event that you connect the projector to a DVD player via the projector's
HDMI input and the projected picture displays wrong colors, please change the color space
to YUV.
1.
Press MENU/EXIT and then press
2.
Press
color space.
This function is only available when the HDMI input port is in use.

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
Using the remote control
1.
Press ZOOM+/ZOOM- to display the Zoom
bar.
2.
Press ZOOM + to magnify the center of the
picture. Press the key repeatedly until the
picture size is suitable for your need.
3.
Use the directional arrows ( ,
on the projector or remote control to
navigate the picture.
4.
To restore the picture to its original size,
press AUTO. You can also press ZOOM -. When the key is pressed again, the
picture is further reduced until it is restored to the original size.
Using the OSD menu
1.
Press MENU/EXIT and then press
2.
Press
displays.
3.
Repeat steps 2-4 in the section of
using the projector control panel, continue to the following steps.
4.
Press
5.
To navigate the picture, press MODE/ENTER to switch to the paning mode and
press the directional arrows ( ,
6.
Use the directional arrows ( ,
navigate the picture.
7.
To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/
out functionality, and press AUTO to restore the picture to its original size. You can
also press
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.
to highlight Color Space Conversion and press
to highlight Digital Zoom and press MODE/ENTER. The Zoom bar
on the projector repeatedly to magnify the picture to a desired size.
repeatedly until it is restored to the original size.
/
until the SOURCE menu is highlighted.
,
,
)
/
until the DISPLAY menu is highlighted.
"Using the remote control"
,
,
) to navigate the picture.
,
,
) on the projector or remote control to
/
to select a suitable
above. Or if you are
Operation
35

Advertisement

Table of Contents
loading

Table of Contents