Timer Display - BenQ MW870UST User Manual

FUNCTION
Presentation
Timer
Language
Projector
Position
Menu
Settings
Operation
Settings
DESCRIPTION
Reminds the presenter to finish the presentation within a certain
time frame. See "Setting the presentation timer" on page 41
details.
Timer period
Sets a preferred length of time for presentation.

Timer display

Sets whether to display the timer on screen.
Timer position
Sets the position where the timer displays on screen.
Timer counting direction
Sets the timer counting direction.
Sound Reminder
Sets a sound reminder if timer is up.
Sets the language for the On-Screen Display (OSD) menus. See
"Using the menus" on page 31
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See
details.
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets whether to display the reminder message.
Direct Power On
Selecting On enables the function. See
page 28 for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
page 82 for details.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
on page 42 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
for details.
"Choosing a location" on page 16
"Starting up the projector" on
"Setting Auto Power Off" on
for
for
"Hiding the image"
Operation
75