Pro-Form XP 210 U User Manual page 9

7. Orient the Seat (12) and the Seat Carriage (30)
as shown. Attach the Seat to the Seat Carriage
with four M8 Locknuts (37), four M8 Split
Washers (45), and four M8 Washers (56).
Note: The Locknuts, Split Washers, and
Washers may be preattached to the Seat.
8. Loosen and remove the Seat Knob (11) from the
Seat Carriage (30).
Look underneath the Seat (12), and locate
the Carriage Block (55) inside the Seat
Carriage (30).
Orient the Seat Post (5) as shown. Set the Seat
Carriage (30) in the bracket on the Seat Post.
Next, insert the Seat Knob (11) upward through
the bracket on the Seat Post (5) into the hole in
the Carriage Block (55). Then, tighten the Seat
Knob.
7
12
56
45
37
8
12
55
30
11
9
30
56
45
37
5