Brother FAX-2820 Service Manual page 186

ERROR MESSAGE
Unable to Init.
(Initialize)
Unable to Print
Unable to Scan
Wrong Paper Size
CAUSE
The machine has a mechanical
problem.
—OR—
A foreign object, such as a clip or
ripped paper, is in the machine.
Paper is not the correct size.
9 - 5
ACTION
(For FAX-2820/2825 and MFC-7220)
When you turn off the machine's power
switch its memory will be cleared.
Check whether the machine has faxes
in its memory. If there are faxes you
need to save them before following the
suggestions below. Turn off the
machine's power switch and then turn
it on again. If the error message
continues, leave the machine for
several minutes and try it again.
(For FAX-2910, FAX-2920 and MFC-
7225N)
Turn off the machine's power switch
and then turn it on again. If the error
message continues leave the machine
for several minutes and then try it
again. (The machine can be turned off
for up to 4 days without losing faxes
stored in the memory.)
Load the correct size of paper (Letter,
Legal or A4) and then press Start.
Confidential