(2) Remove the two bind B M4x12 taptite screws to remove the scanning drive LF FG harness
and NCU unit.
Taptite, bind B M4x12
NCU unit
LF FG harness
Inner chute cover ASSY
(3) Turn the NCU unit upside down.
(4) Remove the two cup S M3x6 taptite screws from the NCU unit to remove the NCU
PCB ASSY.
(5) Disconnect the NCU harness ASSY.
Taptite, cup S M3x6
NCU PCB ASSY
NCU harness ASSY
NCU shield cover
5-33
Confidential