If You Replace The Cis; 1 ] Acquire Of White Level Data And Set The Cis Scanner Area Setting (Function Code 55); If You Replace The Laser Unit; 1 ] Inputting The Adjusted Value Of The Laser Scanner - Brother FAX-2820 Service Manual

6.2 IF YOU REPLACE THE CIS

[ 1 ] Acquire of white level data and set the CIS scanner area setting (Function code 55)
Refer to

6.3 IF YOU REPLACE THE LASER UNIT

[ 1 ] Inputting the adjusted value of the laser scanner
Step (2)
NOTE: Please refer to the illustration below for the identification and the location of the
NOTE: The error of "NG!!" may be shown after the input of the adjusted value but the entry
should be accepted correctly.
Chapter 8, Section 8.4.12.
Step (3)
Step (4)
laser unit serial label.
(1) Double-click the brmainte.EXE file
(maintenance utility) stored in the PC.
(2) Select Input Information from Menu.
Select the applicable model name.
(See step2 of the left illustration)
(3) Check the port (USB) which the
machine is connected through.
(See step3 of the left illustration)
(4) Select 'Adjust Scanner' from Menu.
(See step4 of the left illustration)
(5) Look for the serial number attached on
the laser unit spare part.
(Refer to the NOTE below for the laser
unit serial label)
(6) Enter the last 4 digit numbers of the
machine into the box at the right hand
side. (See step6 of the left illustration)
(7) Click the OK button.
(Please refer to the illustration on the left)
Laser unit serial label
Laser unit serial label
6 - 4
Enter the last 4 digits shown on the label
Confidential