Schwinn Advantage
User Setup Mode
™
The Schwinn
45 Series console lets you store and use 2 User profiles. The User profiles automatically record the workout
®
results for each User profile, and let you view your workout data.
The User profile stores the following data:
•
Name—up to 19 characters
•
Age
•
Weight
•
Gender
•
Custom Workout (program profile)
•
Total time (last workout, average, and total)
•
Average speed (last workout, average, and total)
•
Total distance (last workout, average, and total)
•
Total calories (last workout, average, and total)
•
Total workouts
Note: Push the STOP button to go back to the previous screen.
Add User Profile
1.
From the Power-Up Mode screen, push the Schwinn Advantage
Note: If no User Profile is set up, the Console will show the Name prompt for User 1. If a User Profile does exist, go to
the Edit User Profile option to select CREATE USER 2 and continue with the steps below.
2. The Console display shows the "ENTER NAME" prompt. Push START/ENTER.
3
Enter a name for the user. Use the Increase/Decrease buttons to move through the alphabet and blank space (found
between A and Z). To set each letter, push the START/ENTER button. Push the STOP button to go back to the previ-
ous letter.
Push and hold the START/ENTER button for 3 seconds to complete the entry and go to the next data prompt.
4. The Console display shows the "AGE 30" prompt. Use the Increase/Decrease buttons to adjust the default value, and
push START/ENTER to complete the entry and go to the next prompt.
5. The Console display shows the "WEIGHT 150" prompt. Use the Increase/Decrease buttons to adjust the default value,
and push START/ENTER to complete the entry and go to the next prompt.
6. The Console display shows the "GENDER MALE" prompt. Use the Increase/Decrease buttons to adjust the default
value, and push START/ENTER to complete the entry and go to the next prompt.
Note: Due to screen limitations, "FEMLE" is the abbreviation for female.
7.
The Console display shows the "CREATE CUSTOM YES" prompt. Use the Increase/Decrease buttons to move to the
YES or NO option. To start setup of your Custom Workout, go to YES and push START/ENTER.
To complete User Setup without a Custom Workout, go to the NO option and push START/ENTER. The Console goes
back to the Power-Up Mode screen.
Note: The Custom workout can be created at a later time by editing the User.
8. If you start the Custom Workout setup, the Program Display will show the left column (workout interval) is active by
flashing, with a default resistance level of 3. Use the Increase/Decrease buttons to adjust the resistance level of the
active interval. Push START/ENTER to record the resistance level. The next column to the right becomes active.
Note: The Console display shows the message "N of 20" during setup (N is the current interval). The maximum number
of intervals is 20.
Push and hold START/ENTER to complete the Custom Workout setup.
9. The Console goes back to the Power-Up Mode screen
button to go to User Setup Mode.
™
23