User Setup Mode - Schwinn 120 Upright Bike Assembly Manual

If you select the User profile option, you have two options: VIEW STATS and WORKOUT. Use the
Increase/Decrease buttons to look at the menu options, and push START/ENTER to make your
selection. The Stats option lets you see a summary of your workout data. The Workout option
goes to the Program Menu.

User Setup Mode

The Schwinn 20 Series console lets you store and use 1 User profile in addition to a Guest User
®
with no setup data stored. The User profile automatically records your workout results in your User
profile, and lets you edit data.
The User profile stores the following data:
• Name—up to 19 characters
• Total number of workouts
• Total hours
• Average speed
• Total distance
• Total calories
• Age
• Weight
• Gender
• Custom Workout (program profile, time)
From the Power-Up Mode screen, push START/ENTER and hold for 3 seconds to go to User Setup
Mode. If no User profile is set up, you can add a User. If there is a User profile, you can edit or delete
the User profile.
Note: Push the STOP button to go back to the previous screen or character.
Add User
1. From the Power-Up Mode screen, push START/ENTER and hold for 3 seconds to go to User
Setup Mode. If no User profile is set up, the Console will show the Name prompt.
Note: Use the Increase/Decrease buttons to move through the alphabet. To record each letter,
push the START/ENTER button. Push START/ENTER for a space.
Push and hold START/ENTER to complete the entry and go to the next data prompt. Or you
can tap the START/ENTER button to add spaces until the next data screen appears.
2. Enter your User data on each data screen—Age, Weight, Gender. Use the Increase/Decrease
buttons to adjust the default value, and push START/ENTER to complete each entry and go to
the next prompt.
Note: The default age is 30. The default weight is 150 (lbs).
25