Hardware; Before Assembly - Schwinn 145 Owner's Manual

HARdWARE / BEfORE ASSEMBLY
D E F
Item Qty
A 1
B 4
C 1
D 1
E 1
F 4
G 1

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard,
level surface. Allow a workout area of a minimum 90" x 69" (2.3m x 1.8m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly requires 2 people.
6
A B C
G H I
Description
Carriage Bolt, M8 x 85
Cap
Console adjustment knob
T-Nut
Hex Head Bolt , M8 x 85
Button Head Hex Bolt, M8 x 16
Handlebar adjustment knob
D E F
J K L M
Item Qty Description
H 1 Flat Washer, M12
I 4 Curved Washer, M8
J 2 Flat Washer, M8
K 1 Lock Nut, M8
L 4 Flat Head Hex Screw, M8 x 16
M 2 Phillips Head Screw, M3 x 8
G J
H I K L