Time Setting; Figure 161 System Time Setting - ZyXEL Communications P-660HW-Tx v3 User Manual

Table 97 System General Setup
LABEL
Old Password
New Password
Retype to
Confirm
Apply
Cancel

19.2 Time Setting

To change your ZyXEL Device's time and date, click Maintenance > System > Time
Setting. The screen appears as shown. Use this screen to configure the ZyXEL Device's time
based on your local time zone.

Figure 161 System Time Setting

P-660HW-Tx v3 User's Guide
DESCRIPTION
Type the default admin password (1234) or the existing password you use to
access the system for configuring advanced features.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Type the new password again for confirmation.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 19 System
249