Configuring Firewall Rules - ZyXEL Communications P-660HW-Tx v3 User Manual

Table 65 Firewall Rules (continued)
LABEL
Action
Schedule
Log
Modify
Order
Apply
Cancel

12.6.1 Configuring Firewall Rules

Refer to Section 11.1 on page 159
In the Rules screen, select an index number and click Add or click a rule's Edit icon to display
this screen and refer to the following table for information on the labels.
P-660HW-Tx v3 User's Guide
DESCRIPTION
This field displays whether the firewall silently discards packets (Drop),
discards packets and sends a TCP reset packet or an ICMP destination-
unreachable message to the sender (Reject) or allows the passage of packets
(Permit)
This field tells you whether a schedule is specified (Yes) or not (No).
This field shows you whether a log is created when packets match this rule
(Yes) or not (No).
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing firewall rule. A window displays
asking you to confirm that you want to delete the firewall rule. Note that
subsequent firewall rules move up by one when you take this action.
Click the Move icon to display the Move the rule to field. Type a number in the
Move the rule to field and click the Move button to move the rule to the
number that you typed. The ordering of your rules is important as they are
applied in order of their numbering.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
for more information.
Chapter 12 Firewall Configuration
179