Rule Configuration; Figure 133 Bandwidth Management Rule Configuration; Table 85 Bandwidth Management Rule Configuration - ZyXEL Communications P-660HW-Tx v3 User Manual

Chapter 15 Bandwidth Management
Table 84 Bandwidth Management: Rule Setup (continued)
LABEL
Modify
Apply
Cancel

15.9.1 Rule Configuration

Click the Edit icon or select User Defined from the Service drop-down list in the Rule Setup
screen to configure a bandwidth management rule. Use bandwidth rules to allocate specific
amounts of bandwidth capacity (bandwidth budgets) to specific applications and/or subnets.

Figure 133 Bandwidth Management Rule Configuration

The following table describes the labels in this screen.

Table 85 Bandwidth Management Rule Configuration

LABEL
Rule Configuration
Active
Rule Name
212
DESCRIPTION
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing rule.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select this check box to have the ZyXEL Device apply this bandwidth
management rule.
Enable a bandwidth management rule to give traffic that matches the rule
priority over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum
amounts of bandwidth that can be used by traffic that matches the rule.
Use the auto-generated name or enter a descriptive name of up to 20
alphanumeric characters, including spaces.
P-660HW-Tx v3 User's Guide