Figure 70 More Connections Edit; Table 36 More Connections Edit - ZyXEL Communications P-660HW-Tx v3 User Manual

Chapter 7 WAN Setup

Figure 70 More Connections Edit

The following table describes the labels in this screen.

Table 36 More Connections Edit

LABEL
Active
Name
Mode
Encapsulation
108
DESCRIPTION
Select the check box to activate or clear the check box to deactivate this
connection.
Enter a unique, descriptive name of up to 13 ASCII characters for this
connection.
Select Routing from the drop-down list box if your ISP allows multiple
computers to share an Internet account.
If you select Bridge, the ZyXEL Device will forward any packet that does not
route to this remote node; otherwise, the packets are discarded.
Select the method of encapsulation used by your ISP from the drop-down list
box. Choices are PPPoA, RFC 1483, ENET ENCAP or PPPoE.
P-660HW-Tx v3 User's Guide