STEP 4: Slide the MOUNTING BAR(24) onto both ARCHED SUPPORTS(3).
Insert the LEFT and RIGHT HANDLEBARS(4, 23) onto both
ARCHED SUPPORTS(3) and run through the MOUNTING BAR(24).
Align the holes in the ARCHED SUPPORTS(3), HANDLEBARS
(4, 23), and MOUNTING BAR(24) then bolt them together with
BUTTON HEAD BOLTS(M6x1x15mm)(15).
STEP 5
Attach the LEFT HANDLEBAR(4)
to the INNER BAR(2) with CAR-
RIAGE BOLTS(M6x1x58mm)
(13), LOCK WASHERS(M6)(16),
and ACORN NUTS(M6x1)(17).
Repeat on right side to attach the
RIGHT HANDLEBAR(23) to the
OUTER BAR(1). Tighten all bolts
from STEP 1 to STEP 5.
Assembly Instructions
3