Replacing The Badge - Dell OptiPlex GX260 Service Manual

1. Open the front USB door.
2. From inside the door, push in the two tabs on either side of the badge to release the badge.
3. Press the badge until it is freed.

Replacing the Badge

Small Form-Factor Computer
1. Replace the plastic computer cover. Make sure that the two metal hooks and tabs are securely in place.
Computer Cover Replacement
1 metal hooks (2)
To help replace the plastic computer cover, remove the accent door and front mask from the plastic computer cover:
a. Remove the front mask by releasing the tabs on the inside of the plastic computer cover.
b. Remove the accent door by pressing the middle of the door while lifting away the sides of the door.
c. After replacing the plastic computer cover, snap the front mask and accent door into place.
Front Mask and Accent Door Removal