Dell OptiPlex GX260 Service Manual page 94

Installing an AGP or DVI Adapter Card
1. To add or replace the card, press the card-clip lever toward the card slot and gently press the card into the slot
connector until it clicks into place.
2. Release the card-clip lever, ensuring that the tab on the card-clip lever fits into the notch on the front end of the card.
3. Secure the card by lowering the hinged lever on the back panel.
4. Close the computer cover.
5. Attach the computer stand (optional).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack, and then plug it into the
computer.
6. Connect the monitor cable to the card's video connector.
7. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page