NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Easel stand
Steps
1. Insert the tabs on the stand bracket into the slots on the system-board shield.
2. Align the screw holes on the stand with the screw holes on the system-board shield.
3. Replace the four screws (M3x5) that secure the stand to the system-board shield.
4. Replace the stand cover.
5. Place the computer in its upright position.
Pedestal stand
Steps
1. Insert the tabs on the stand bracket into the slots on the system-board shield.
2. Align the screw holes on the stand with the screw holes on the system-board shield.
3. Replace the four screws (M3x5) that secure the stand bracket to the system-board shield.
4. Replace the stand cover.
5. Place the computer in its upright position.
computer. After working inside your computer, follow the instructions in
Replacing the stand
Replacing the stand
4
After
www.dell.com/
13