Names And Functions Of Each Part - Hitachi CP-S830W/E Operating Manual

Names and functions of each part

Main unit
RESET button
Resets unit to factory settings.
(See page 14)
MUTE button
Silences the sound. (Cancels the mute
when the unit is set in mute mode.)
LAMP indicator
This lights or blinks when the lamp does
not light. (See page 30)
STANDBY / ON button
Power ON/OFF button.
OFF sets the unit in standby mode.
(see page 12~13)
ZOOM knob
Adjusts picture size.
(See page 12)
Remote control
sensor
Lens
Lens cap
· Use the remote control transmitter within
the range of about 16 feet from the remote
control sensor and within 30° to both the
left and right.
RESET
MENU
MUTE INPUT
ON
LAMP TEMP
STANDBY/ON
Speaker Speaker
FOCUS ring
Adjusts focus.
(See page 12)
MENU button
Picture adjustments.
Refer to page 14~17 for details.
INPUT button
To select the input source.
Each time this button is pressed, the input
source is changed in sequence as shown
below.
RGB1 RGB2 VIDEO1
TEMP indicator
This lights or blinks when temperature
inside the projector is too high or when fan
is abnormal.(See page 30)
ON indicator
This blinks in the standby mode and lights
in the operation mode.(See page 30)
Cooling fan
(exhaust)
Handle
VIDEO2
7