Basic Operations - Hitachi CP-S830W/E Operating Manual

Basic operations

To project the picture
3
1 Turn the MAIN POWER switch of the projector on.[ I : ON]
· The ON indicator will light up orange.
2 Press the STANDBY/ON button.
· The ON indicator blinks (green) and then lights (green).
· The ON indicator will blink green during warm-up and light up.
· Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
power is turned off, since the lamp has cooled preparing for next lighting.
Remove the lens cap.
3
4 Adjust picture size using the projection lens ZOOM knob.
5 Adjust focus using the projection lens FOCUS ring.
Power on all connected equipment.
6
The method of connecting various equipment, see on the page 18~26.
7 Press the INPUT button or the INPUT SELECT (VIDEO or
RGB) button to select the source of the signal to be projected
on the screen.
· The selected signal input is displayed at the bottom right of the screen
for 3 seconds.
12
4
5
1
RESET
MENU
2
MUTE INPUT
ON
LAMP TEMP
7
STANDBY/ON
2
7
RIGHT
RESET
STANDBY/ON
MENU
VOL
TIMER
BLANK
POSITION MUTE
VIDEO1/2 RGB1/2
INPUT
Example on-screen display
RGB1