Example Of System Setup - Hitachi CP-S830W/E Operating Manual

Example of system setup

Connecting various equipment.
AC Inlet
VTR, etc.
(video model only)
· To protect from radio interference, core is attached to each provided or optional cable: Do
Caution
not use cables other than provided cables and optional cables.
·
Since both ends of audio cable are the same shape, either end can be connected to any side.
However, use the cable with the core set to the projector side.
· Turn power off to all devices before connecting.
· Refer to the instruction manual of each device before connecting.
26
INPUT
S-VIDEO
1 2
VIDEO
1 2
AUDIO
L
1 2
R
VTR with S-VHS out
(video model only)
Liquid crystal projector
RGB IN
1
2
AUDIO IN OUT
1 2
Audio amplifying equipment
1
Core
Computer (Note type)
RGB OUT
CONTROL
CRT Display
Computer(Desk type)
Computer