Liquid Crystal Projector CP-S370W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung aufmerksam. MANUEL D'UTILISATION Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
Liquid Crystal Projector USER'S MANUAL USER'S MANUAL WARNING • Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE TRADEMARK ACKNOWLEDGMENT : CONTENTS...
Power Cord (UK Type) (Europe Type) (US Type) Projector Liquid Crystal Projector CP-S370W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung aufmerksam. MANUEL D'UTILISATION Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
Part Names Speaker Zoom Knob Focus Ring Handle Hook Remote Control Sensor Power Switch Lens AC Inlet (to the Power Cord) Lens Cap Foot Adjuster Ventilation Openings (Intake) FRONT/LEFT VIEW OF THE PROJECTOR Control Panel (Refer to P.9 "OPERATIONS") STANDBY/ON Button INPUT Button LAMP Indicator KEYSTONE Button...
Page 5
Part Names (continued) VIDEO Button VIDEO STANDBY/ON STANDBY/ON Button RGB Button KEYSTONE Button MENU SELECT Button KEYSTONE Button Used to click the left mouse button. MENU Used to operate SELECT the mouse shift POSITION Button function . RESET Button MENU RESET POSITION Used to click the right...
Loading the Battery First Loading: “+” side Replacing: Pull out Battery Holder CAUTION • Incorrect handling of the battery could result in fire or personal injury.The battery may explode if not handled properly. Be careful in handling the battery according to instructions of accompaning manual "SAFETY INSTRUCTIONS"and this manual.
Cabling Table 2. Cabling Function Terminal Cable RGB IN 1 Accessory or optional RGB cable with D- RGB input RGB IN 2 sub 15-pin shrink jack and inch thread screws RGB output RGB OUT AUDIO IN 1 (interlocked with RGB IN 1) Audio input Optional audio cable with stereo mini jack (from the computer)
Power Connection CAUTION • Be carful in handling the power Power cord according to instructions of the outlet accompanying manual "SAFETY INSTRUCTIONS" and this manual. • Connect the power cord firmly. Avoid using a loose, unsound outlet or contact failure. Power Cord AC Inlet Example of system setup...
OPERATIONS OPERATIONS STANDBY/ VIDEO STANDBY/ON STANDBY/ON Button ON Button KEYSTONE POWER Indicator MENU SELECT MENU RESET POSITION Zoom Knob MAGNIFY FREEZE VOLUME MUTE AUTO BLANK Focus Ring Power Switch Lens Cap Power ON Power OFF WARNING • Please read this manual, and the separate “SAFETY INSTRUCTIONS”...
Basic Operation Table 3 . Basic Operation Item Description Select Input Signal ( : Press the INPUT button. RGB IN 1→RGB IN 2→ VIDEO IN → S-VIDEO IN → COMPONENT VIDEO (→ RGB IN 1) Select RGB Input : Press the RGB button. VIDEO IN / S-VIDEO IN / COMPONENT VIDEO →...
Page 12
Table 3. Basic Operation (continued) Item Description VOLUME Volume Adjustment : Press the VOLUME button. Set/Clear Mute Mode : Press the MUTE button. No sound is heard in the MUTE MUTE mode. Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE), and horizontal size(H.SIZE) are automatically adjusted.
Setup Menu SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. BRIGHT BRIGHT BRIGHT CONTRAST CONTRAST CONTRAST V POSIT SHARPNESS COLOR H POSIT COLOR H PHASE H PHASE TINT COLOR BAL R H SIZE COLOR BAL R COLOR BAL B COLOR BAL R COLOR BAL B...
Input Menu SETUP INPUT IMAGE OPT. EXECUTE AUTO CANCEL VIDEO HDTV Table 5. Input Menu Item Description Automatic Adjustment at RGB Input: Select the EXECUTE with the button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted. Use with the window at maximum size in the application display.
Image Menu SETUP INPUT IMAGE OPT. BLANK MIRROR START UP GAMMA COLOR TEMP Table 6. Image Menu Item Description Select Blank Screen Color: Select color with the button. BLANK • The image is cleared and the entire screen is displayed in the selected color, when BLANK mode is set with BLANK ON, or when there is no signal for 5 minutes.
Options Menu SETUP INPUT IMAGE OPT. VOLUME MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER Table 7. Options Menu Item Description ↔ VOLUME Reduce Increase MENU COLOR Select Menu Background Color: Select with the button. Select Menu Display Language: Select with the button.
No Signal Menu VOLUME BLANK MIRROR START UP MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER Table 8. No Signal Menu Item Description ↔ Reduce Increase • When this function is used, audio input is automatically switched to video. The VOLUME audio input can be switched by moving the DISK PAD left and right during the display of the volume adjustment bar.
MAINTENANCE MAINTENANCE Lamp HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING • For disposal of used lamp, treat according to the instruction of community authorities. • Since the lamp is made of glass, do not apply shock to it and do not scratch it. •...
Page 19
Replacing the Lamp CAUTION • Ensure that screws are tightened properly. Screws not tightened fully may result in injury or accidents. • Do not use the projector with the lamp cover removed. Resetting the Lamp Timer → • NOTE ENGLISH-18 ENGLISH-18 Downloaded from www.Manualslib.com...
Air Filter Cleaning the air Filter Replacing the Air Filter CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly. •...
TROUBLESHOOTING TROUBLESHOOTING OSD Message Table 9. OSD Messages Message Contents The usage time of lamp will be reaching 2000 hr CHANGE THE LAMP shortly. AFTER REPLACING LAMP, RESET THE LAMP TIME. It is recommended to replace the lamp soon. Prepare a new lamp as a replacement.
Indicators Message Table 10. Indicators Message POWER LAMP TEMP Contents indicator indicator indicator Lights Turns off Turns off The Standby mode has been set. orange Blinks Turns off Turns off Warming up. Please wait. green Lights Turns off Turns off ON.
Symptom Table 11. Symptom Symptom Possible cause Remedy Page The main power switch is not Turn on the main power switch. turned on. The power is not turned on. The power cord is Plug the power cord into an AC disconnected.
TECHNICAL TECHNICAL Dimension Diagram 94.6 76.5 Unit : mm Signal Connector Pin Assignment 1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT) Pin No Signal Pin No Signal Pin No Signal Video input Red RGB IN 1: SCL(DDC) Video input Green Ground RGB IN 2: -...
Example of computer signal Resolution fH (kHz) fV (Hz) Rating Signal mode Display mode H × × V 640 × 350 37.9 85.1 VESA VGA-1 Zoom in 640 × 400 37.9 85.1 VESA VGA-2 Zoom in 720 × 400 37.9 85.0 VESA TEXT...
Page 28
Initial set signals Back porch b Front porch d Back porch b Front porch d Display interval c Display interval c Sync a Sync a Computer / Horizontal signal timing (µs) Computer / Vertical signal timimg (lines) Signal Signal VGA-1 (85Hz) 20.3 VGA-1 (85Hz) VGA-2 (85Hz)
Page 29
Connection to the Mouse Control 1. PS/2, ADB or Serial Mouse 2. USB Mouse NOTE PS/2 Mouse Projector Computer DATA Mouse jack CONTROL Terminal DATA Mini DIN 6-pin D-sub 15-pin shrink jack SEL0 TECHNICAL - 4 Downloaded from www.Manualslib.com manuals search engine...
Page 30
ADB Mouse Projector Computer ( POWER ON ) CONTROL Terminal DATA Mouse jack D-sub 15-pin shrink jack Mini DIN 4-pin Serial Mouse Projector Computer CONTROL Terminal Mouse jack D-sub 15-pin shrink jack D-sub 9-pin SEL0 USB Mouse USB jack (B type) Projector Computer USB jack...
Page 31
RS-232C communication Projector Computer RS-232C jack D-sub 9-pin Control jack D-sub 15-pin shrink jack SELO Communications setting 19200bps, 8N1 1 Protocol 2 Header 3 Command data Command data chart byte_0 byte_1 byte_2 byte_3 byte_4 byte_5 Action Type Setting code high high high Action (byte_0 - 1)
Page 32
Requesting projector status (Get command) Changing the projector settings (Set command) Using the projector default settings (Reset Command) Increasing the projector setting value (Increment command) Decreasing the projector setting value (Decrement command) When a command sent by the projector cannot be understood by the computer When data sent by the projector cannot be practice •...
Command data chart Command data Names Operation type Header Action Type Setting code BE EF 06 00 3B D3 01 00 00 30 00 00 Orange BE EF 06 00 AB D2 01 00 00 30 01 00 Green BE EF 06 00 5B D2 01 00...
Page 34
Command data chart Command data Names Operation type Header Action Type Setting code BE EF 06 00 7C D2 02 00 07 30 00 00 Magnify Increment BE EF 06 00 1A D2 04 00 07 30 00 00 Decrement BE EF 06 00 CB D3...
Page 35
Command data chart Command data Names Operation type Header Action Type Setting code Normal BE EF 06 00 46 D3 01 00 02 20 00 00 Mute Mute BE EF 06 00 D6 D2 01 00 02 20 01 00 BE EF 06 00 75 D3...
Page 36
Command data chart Command data Names Operation type Header Action Type Setting code BE EF 06 00 F1 72 02 00 01 22 00 00 Sharpness Increment BE EF 06 00 97 72 04 00 01 22 00 00 Decrement BE EF 06 00 46 73...
Page 37
Command data chart Command data Names Operation type Header Action Type Setting code BE EF 06 00 CB D0 01 00 08 30 01 00 Sync on G BE EF 06 00 5B D1 01 00 08 30 00 00 BE EF 06 00 68 D1...
Page 38
REGULATORY NOTICES REGULATORY NOTICES FCC Statement Warning WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.