Contents Of Shipping Box; Names And Functions Of Each Part - Hitachi CPX940E Operating Manual

Contents of shipping box
Check that the carton contains the following items.
Liquid Crystal Projector Remote Control Remote Control
Transmitter Batteries
Power Cord 3-Conductor
RGB Cable
Ilov-us
Mec adapter
Video/Audio Cable (15-15 pin M/M) with dip switch
220- UK, Europe
.xMwiErnB
----
—-
=--
—~. .
—.-w
—— i
--------
.—" —
~"
-.—
—
Operating Guide
Mouse cable X3
Names and functions of each part
ON indicator
This blinks in the standby mode and lights
in the operation mode.(See page 32)
INPUT button
To select the input source.
Each time this button is pressed, the input
source is changed in sequence as shown
below.(See page 13)
RGB1 — RGB2 — VIDEO
MENU button
Picture adjustments.
Refer to page 16-19 for details.
LAMP indicator ~~
IAMP
. . .. . . ,
This lights or blinks when the lamp does
~J
TEMP indicator
not light. (See page 32)
\
This lights' or blinks when temperature
inside the projector is too high or when fan
is abnormal.(See page 32)
ng
St)
e
fan
Use the remote control transmitted within the range
FOCUS ring
.
of about 16 feet from the remote control sensor and
Adjusts focus. (See page 13)
within 30° to both the left and right.
8