Basic Operation; Table 2. Basic Operations - Hitachi Projector User Manual

O O P P E E R R A A T T I I O O N N S S ( ( c c o o n n t t i i n n u u e e d d ) )

Basic Operation

The Basic operations shown in Table 2 is performed from the projector control panel or the supplied
remote control transmitter. (items indicated by * may be used from the control panel)
NOTE: Use the remote control transmitter at a distance of approximately 3m from the sensor on the
front of the projector, and within a range of 30° left-right. Strong light and obstacles will
interfere with operation of the remote control transmitter.
Table 2 . Basic Operation
Item
Changes in input signal in sequence: Press INPUT
RGB1 → RGB2 → VIDEO → S-VIDEO (→ RGB1)
Select RGB input: Press RGB button.
VIDEO/S-VIDEO → RGB1/RGB2
INPUT
SELECT
Select VIDEO/S-VIDEO input: Press VIDEO button.
RGB1/RGB2 → VIDEO/S-VIDEO
• The selected signal name is displayed for approximately three seconds
when the input signal is changed.
Set/Clear position adjustment mode: Press POSITION button.
The [
Image position adjustment: Press the
position adjustment mode.
POSITION
• Valid only in the MAGNIFY mode with VIDEO/S-VIDEO input.
• The [
automatically, after approximately ten seconds of inactivity.
Refer to P.4.
Initialise menu items: Select an item and press the RESET
Initialise position adjustment: Press the RESET
*
RESET
and the POSITION mode.Valid only when RGB signal is input.
• Valid except for VOLUME, LANGUAGE and H PHASE.
• RESET button may operate as the mouse control button. Refer to P.4.
Set MAGNIFY mode: Press the MAGNIFY
Move magnified area: Run Position Adjustment in MAGNIFY mode.
Adjust magnification: Press MAGNIFY
MAGNIFY
Clear MAGNIFY mode: Press MAGNIFY
• MAGNIFY is cleared by running or setting AUTO, ASPECT, INPUT
SELECT or VIDEO, or by changing the input signal.
Set/Clear FREEZE mode: Press FREEZE button.
The [II] icon is displayed, and the image frozen, in the FREEZE mode.
• FREEZE is cleared by running or setting POSITION, VOLUME, MUTE,
FREEZE
Auto Adjust, BLANK ON/OFF, or MENU ON/OFF, or by changing the
input signal.
• Do not forget to clear frozen static images.
ENGLISH-10 ENGLISH-10
] icon is displayed in the POSITION mode.
] icon is extinguished, and the position adjustment mode cleared
, , and buttons may operate as the mouse control button.
Description
RGB2 ↔ RGB1
S-VIDEO ↔ VIDEO
, ,
button.
/ in MAGNIFY mode.
button.
OFF
*
button.
and buttons in the
button.
button