Set Up The Software - Nvidia QUADRO G-SYNC II User Manual

NVIDIA Quadro G-Sync II User Guide

Set Up the Software

Basic Genlock Setup
1. Go to the nvidia-settings frame lock panel.
2. Click Add Devices, then add the X Server that contains the display
and G-Sync II cards that you want to sync to this external source.
An X Server is typically specifi ed in the format:
For example:
After adding an X Server, the G-Sync Devices section shows
the X server name, the graphics card attached to the X
server, and the displays attached to the graphics board.
3. Check the Server check box for one of the displays connected to the
system in order to designate the system as the frame lock server.
4. Click the Use House Sync if Present checkbox.
5. Click Enable Frame Lock.
The display device(s) may take a moment to stabilize. If it
does not stabilize, you may have selected a synchronization
signal that the system cannot support–click Disable
Frame Lock and then check the external sync signal.
30
mycomputer.domain.com:0 or localhost:0
system:m