Nvidia QUADRO G-SYNC II User Manual page 17

3. Under The timing server is, click the On this system radio button.
4. Click Apply.
The graphics board should automatically detect the
sync signal and no further action is needed.
The following sections provide information on other tasks such as
how to adjust the synchronization to the external house sync. You can
also consult the online help by pressing F1 to open the Help fi le and
then opening the Workstation->Frame Synchronization contents.
Detecting the House Sync Signal
Normally, the software automatically detects the signal
type that is being used. If necessary, you can force the
software to detect the signal type as follows:
1. On the system that you have
set up to be the server, right-
click the desktop and then
from the pop-up menu click
NVIDIA Control Panel.
2. From the NVIDIA Control
Panel Select a Task pane, under
the Workstation heading,
click Synchronize displays
to open that page, then click
Edit Settings to open the
Server Settings dialog box.
3. Click the Sync
signal detection list arrow and then click the item
corresponding to the house signal source.
4. Click OK to save the settings.
NVIDIA Frame Synchronization Under Windows
13