How To Set Up Genlock; Set Up The Hardware - Nvidia QUADRO G-SYNC II User Manual

NVIDIA Quadro G-Sync II User Guide

How To Set Up Genlock

The following are the basic steps to genlocking a system.
Detailed instructions are provided in the related sections:


Set Up the Hardware

Connect the external sync source to the BNC
connector on the graphics board.

Set Up the Software
Use the NVIDIA Control Panel Workstation->Synchronize
displays page to establish the system as the server, to
choose the sync source, and confi gure the sync pulse.
Set Up the Hardware
1. Start the system, then connect the external source signal to the House
Sync connector (BNC) of the Quadro G-Sync II option card.
The Quadro G-Sync II supports the following
external synchronization signal types:

TTL (3.3 volt level)

Composite Bi-level (NTSC or PAL sources
use bi-level composite signals)

Composite Tri-level (HDTV sources commonly
use tri-level composite signals)
10