How To Set Up Frame Lock - Nvidia QUADRO G-SYNC II User Manual

NVIDIA Quadro G-Sync II User Guide
Restoring an Unstable Display
If your display becomes unstable and you want to restore it to
its original confi guration, do one or more of the following:
 Click Restore Defaults and then click Apply.

Disconnect the external house sync.
Viewing the Connection Status
See the section Checking the Connection Status (page 24).

How To Set Up Frame Lock

The following are the basic steps to frame locking several systems. Detailed
instructions are provided in the section Set Up the Hardware (page 17).

Set Up the Hardware
Connect all the systems together using standard CAT5 patch cabling.
Note:
WARNING! The voltage and signal on the frame lock
ports are different from Ethernet signals. Do not connect
a Frame lock port to an Ethernet card or network hub.
Doing so can cause damage to the hardware.

Set Up the Server Software
Use the NVIDIA Control Panel Synchronize Displays
page to establish the system as the server.

Set Up the Client Software
Use the NVIDIA Control Panel Synchronize Displays page
for each client to enable frame lock on that system and to add an
optional delay to the sync pulse before transmitting to other clients.
16