Automatic Transmission; Engaging Reverse Gear - Mercedes-Benz E-Class Coupe Operator's Manual

Park position with parking lock
j
Reverse gear
k
Neutral
i
Drive
h
Push the DIRECT SELECT lever in the
X
direction of arrow P.
i
The automatic transmission shifts into
park position P automatically:
if you open the driver's door while the
R
vehicle is stationary in transmission
position D or R
if you open the door while traveling at
R
very low speeds in transmission position
D or R
HOLD function or DISTRONIC PLUS: if the
vehicle is braked using the HOLD function or
DISTRONIC PLUS, the automatic
transmission shifts automatically to
transmission position P. In addition, at least
one of the following conditions must be
fulfilled:
the engine is switched off.
R
the driver's door is open and the seat belt
R
is not in the buckle.
Engaging reverse gear R
! Only shift the automatic transmission to
R when the vehicle is stationary.
When the vehicle is stationary, depress the
X
brake pedal.
Push the DIRECT SELECT lever up past the
X
first point of resistance.

Automatic transmission

Shifting to neutral N
G
WARNING
If children are left unsupervised in the vehicle,
they could:
open the doors, thus endangering other
R
people or road users.
get out and disrupt traffic.
R
operate the vehicle's equipment.
R
Additionally, children could set the vehicle in
motion if, for example, they:
release the parking brake.
R
shifting the automatic transmission out of
R
park position P
Start the engine.
R
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
When the vehicle is stationary, depress the
X
brake pedal.
Push the DIRECT SELECT lever up or down
X
to the first point of resistance.
If the engine has been switched off, the
automatic transmission automatically shifts
to N.
If the automatic transmission is to remain in
neutral N, e.g. for washing the vehicle in car
washes with a towing device, please observe
the following instructions:
Using the SmartKey:
Make sure that the ignition is switched on.
R
When the vehicle is stationary, depress the
R
brake pedal and keep it depressed.
Shift to neutral N.
R
Release the brake pedal.
R
If the parking brake is engaged, release it.
R
Switch off the ignition and leave the
R
SmartKey in the ignition lock.
173
Z