Memory Function - Mercedes-Benz E-Class Coupe Operator's Manual

Memory function

130
Using the memory button
Button for the driver's side exterior mirror
:
Button for the front-passenger side
;
exterior mirror
Adjustment button
=
Memory button M
?
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M ?.
Turn the SmartKey to position 2 in the
X
ignition lock (
With the exterior mirror on the front-
X
passenger side activated, use adjustment
button = to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
Press memory button M ? and one of the
X
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
these steps.
page 165).
Y
Calling up a stored parking position
setting
Button for the driver's side exterior mirror
:
Button for the front-passenger side
;
exterior mirror
Adjustment button
=
Memory button M
?
Turn the SmartKey to position 2 in the
X
ignition lock ( page 165).
Y
Adjust the exterior mirror on the front-
X
passenger side using button ;.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
if you press button : for the exterior
R
mirror on the driver's side
Memory function
Storing settings
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.