Automatic Transmission - Mercedes-Benz CLE Coupe 2023 Owner's Manual

Displaying engine data
Multimedia system:
© Info
4 5
Select Engine.
#
The engine data is displayed.
%
The actual (maximum) values that can be ach-
ieved for engine output and engine torque
may deviate from the certified values within
the country-specific guidelines for permissible
tolerances (basis: UN-ECE No. 85 or country-
specific guidelines).
Influencing variables that can influence this
are, for example:
Sea level
R
Fuel quality
R
Outside temperature
R
Operating temperature of the engine
R
Adjust your driving style accordingly.
The p warning lamp in the driver's display
is on until the engine has reached operating
temperature.
%
The values displayed serve only as orienta-
tion. The values for engine output and engine
torque shown on the central display may devi-
ate from the actual values.
%
The p warning lamp to show the power
output limitation after starting the vehicle is
not available in all vehicle models.

Automatic transmission

DIRECT SELECT lever
▌Function of the DIRECT SELECT lever
& WARNING Risk of accident due to incor-
rect gearshifting
If the engine speed is higher than the idle
speed and you engage the transmission posi-
tion h or k, the vehicle may accelerate
sharply.
If you engage the transmission position
#
h or k when the vehicle is at a stand-
still, always depress the brake pedal
F236 0017 02
Driving and parking 241
firmly and do not accelerate at the same
time.
& WARNING Accident– and risk of injury
with unsupervised children in the vehicle
If you leave children unattended in the vehicle,
they can in particular
Open doors and thereby endanger other
R
persons or road users.
get out of the car and are hit by traffic.
R
Operate vehicle equipment and become
R
trapped, forexample.
In addition, the children could also set the
vehicle in motion, for exampleby:
releasing the parking brake.
R
change the gearbox setting.
R
start the vehicle.
R
Never leave children unattended in the
#
vehicle.