Hazard Warning Lamps; High Beam Flasher; High-Beam Headlamps - Mercedes-Benz E-Class Coupe Operator's Manual

Exterior lighting
138

High-beam headlamps

High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of
arrow :.
In the à position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The blue K indicator lamp in the
instrument cluster lights up when the high-
beam headlamps are switched on.
To switch off the high-beam
X
headlamps: move the combination switch
back to its normal position.
The blue K indicator lamp in the
instrument cluster goes out.
i
Vehicles with Adaptive Highbeam Assist:
when Adaptive Highbeam Assist is active,
it controls activation of the high-beam
headlamps (
Y
page 139).
High-beam flasher
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To switch on: turn the SmartKey in the
X
ignition lock to position 1 or 2, or start the
engine.
Pull the combination switch in the direction
X
of arrow =.

Hazard warning lamps

To switch on the hazard warning lamps:
X
press button :.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
To switch off the hazard warning
X
lamps: press button :.