G
WARNING
Children could become trapped if they
activate the memory function, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: position of the exterior
R
mirrors on the driver's and front-passenger
sides
Adjust the seat (
page 118).
X
Y
On the driver's side, adjust the steering
X
wheel (
page 125) and the exterior mirrors
Y
(
page 127).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.
Calling up a stored setting
Press and hold the relevant storage
X
position button 1, 2 or 3, until the seat,
Memory function
steering wheel and exterior mirrors are in
the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
131
Z