Deactivating - Mercedes-Benz E-Class Coupe Operator's Manual

Driving systems
202
Important safety notes
G
WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if:
there is a malfunction in the system or in
R
the voltage supply.
the HOLD function has been deactivated by
R
pressing the accelerator pedal or the brake
pedal, e.g. by a vehicle occupant.
the electrical system in the engine
R
compartment, the battery or the fuses have
been tampered with.
the battery is disconnected
R
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
the HOLD function and secure the vehicle
against rolling away.
! If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes
automatically in certain situations. To
prevent damage to the vehicle, deactivate
DISTRONIC PLUS and the HOLD function in
the following or other similar situations:
when towing the vehicle
R
in the car wash
R
Activation conditions
You can activate the HOLD function if:
the vehicle is stationary
R
the engine is running or if it has been
R
automatically switched off by the ECO
start/stop function
the driver's door is closed or your seat belt
R
is fastened
the parking brake is released
R
the transmission is in position D, R or N
R
DISTRONIC PLUS is deactivated
R
Activating the HOLD function
Make sure that the activation conditions
X
are met.
Depress the brake pedal.
X
Quickly depress the brake pedal further
X
until ë: appears in the multifunction
display.
The HOLD function is activated. You can
release the brake pedal.
i
If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
Deactivating the HOLD function
The HOLD function is deactivated
automatically if:
you accelerate and the transmission is in
R
position D or R.
you shift the transmission to position P.
R
you depress the brake pedal again with a
R
certain amount of pressure until ë
disappears from the multifunction display.
you activate DISTRONIC PLUS.
R
When the HOLD function is activated, the
transmission is shifted automatically to
position P if:
the driver's door is open and the driver's
R
seat belt is unfastened.
the engine is switched off, unless it is
R
automatically switched off by the ECO
start/stop function.
a system malfunction occurs.
R
the power supply is not sufficient.
R