Activating/Deactivating - Mercedes-Benz GLK-Class Operator's Manual

Glk-class
Hide thumbs Also See for GLK-Class:
Table of Contents

Advertisement

Activating/deactivating PRE-SAFE
Brake
®
PRE-SAFE
Brake is only available in vehicles
with DISTRONIC PLUS.
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the 9 or : button to select
X
PRE-SAFE
Brake.
Press the a button.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
®
When PRE-SAFE
Brake (
activated, the multifunction display shows
the Ä symbol as long as the HOLD
function is not activated (
Vehicles with Parking Guidance: if
PARKTRONIC is activated and you are driving
at a speed below 22 mph (35 km/h), the j
Parking Guidance symbol is shown instead of
the Ä symbol.
If the
PRE-SAFE Brake: Sensors
Deactivated
message appears, the radar
sensor system is deactivated.
Switch on the radar sensor system
X
(
page 229).
Y
For more information on PRE-SAFE
see (
page 69).
Y
Activating/deactivating ATTENTION
ASSIST
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the 9 or : button to select
X
Attention
Assist.
Press the a button.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
®
DriveAssist
page 69) is
Y
page 179).
Y
®
Brake,
DriveAssist
Menus and submenus
When ATTENTION ASSIST (
activated, the À symbol appears in the
multifunction display when the ignition is on.
For further information about ATTENTION
ASSIST, see (
page 197).
Y
Activating/deactivating Blind Spot
Assist
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the 9 or : button to select
X
Blind Spot
Assist.
Press the a button.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
If the
Blind Spot Assist Sensors
Deactivated
or
Act. Blind Spot Asst.
Sensors Deactivated
the radar sensor system is deactivated.
Switch on the radar sensor system
X
(
page 229).
Y
For further information about Blind Spot
Assist, see (
page 198).
Y
For further information about Active Blind
Spot Assist, see (
page 202).
Y
activating/deactivating Lane Keeping
Assist
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the 9 or : button to select
X
Lane Keep. Asst.
Press the a button.
X
The current selection is displayed.
Press a to confirm.
X
Press the : or 9 button to set Off,
X
Standard
or Adaptive.
Press the a button to save the setting.
X
page 197) is
Y
DriveAssist
message appears,
DriveAssist
Z
225

Advertisement

Table of Contents
loading

Table of Contents