Adjusting Lumbar Support - Mercedes-Benz GLK-Class Operator's Manual

Seats
100
Adjusting the rear seat head restraint
height
Once the head restraint is fully lowered, press
release catch :.
To raise: pull the head restraint up to the
X
desired position.
To lower: press release catch : and push
X
the head restraint down until it is in the
desired position.
Adjusting the rear seat head restraint
angle
Adjust the head restraints so that they are as
close as possible to your head.
You can only adjust the two outer head
restraints.
Pull or push the top of the head restraint
X
until it is in the desired position.
Installing/removing the rear seat head
restraints
G
WARNING
Occupants should only travel sitting on seats
which have the head restraints installed. This
reduces the risk of injury to occupants in the
event of an accident.
To remove: pull the head restraint up to
X
the stop.
Press release catch : and pull the head
X
restraint out of the guides.
To re-install: insert the head restraint so
X
that the notches on the bar are on the left
when viewed in the direction of travel.
Push the head restraint down until you hear
X
it engage in position.
Adjusting the lumbar support
You can adjust the contour of the front seats
so as to provide optimum support for your
back.