Connecting The Adapter - Cisco Linksys USB200M User Manual

Compact USB 2.0 10/100 Network Adapter

Connecting the Adapter

1. With your PC turned off, insert the Adapter's USB end into your PC's USB port or USB hub.
2. Insert one end of an Ethernet network cable into the Adapter's RJ-45 port.
3. Insert the other end of the Ethernet network cable into an Ethernet networking device.
The hardware installation is complete.
To install the Adapter's driver, proceed to "Chapter 3: Driver Installation for the Compact USB 2.0 10/100
Network Adapter" and to the section for the Windows operating system that your PC uses.
With these, and many other Linksys products, your networking options are limitless. Go to the Linksys website at
www.linksys.com for more information about products that work with the Compact USB 2.0 10/100 Network
Adapter.
Chapter 2: Getting to Know and Connecting the Compact USB 2.0 10/100 Network Adapter 5
USB Icon and Ports