Driver Installation For Windows 98; Figure 3-17: Search For Driver; Figure 3-18: Specify A Location - Cisco Linksys USB200M User Manual

Compact USB 2.0 10/100 Network Adapter

Driver Installation for Windows 98

NOTE: Do not click Cancel at any time during the installation
process. Doing so will prevent your driver from being properly
installed on your PC.
1. If you haven't already, start your computer.
2. Windows 98 will automatically detect the Adapter connected to your PC. When the first Add New Hardware
Wizard screen appears, insert the Driver CD into your CD-ROM drive, and click the Next button.
3. Select Search for the best driver for your device (Recommended), and click the Next button.
4. Select Specify a location: to find the correct driver, and enter D:\win98 in the field provided. Click the Next
button to continue.
NOTE: Throughout this user guide, it is assumed that "D" is the
letter of your CD-ROM drive.
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows 98

Figure 3-17: Search for Driver

Figure 3-18: Specify a Location

15