Figure 3-11: Ready To Install Driver; Figure 3-12: Installation Complete - Cisco Linksys USB200M User Manual

Compact USB 2.0 10/100 Network Adapter
4. When Windows notifies you that it is ready to install the driver files, click the Next button to continue.
5. When Windows has completed copying the driver files, click the Finish button.
6. When asked if you want to restart your computer, remove the Driver CD from the CD-ROM drive, and click the
Yes button. If Windows does not ask you to restart your PC, click Start. Click Shut Down, and select Restart.
Then click the OK button.
Congratulations! The installation of the Compact USB 2.0 10/100 Network Adapter is complete.
To enable file and printer sharing, go to the next section, "Windows Millennium Network Configuration."
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows Millenium

Figure 3-11: Ready to Install Driver

Figure 3-12: Installation Complete

11