Figure 3-23: Configuration Tab; Figure 3-24: Access Control Tab - Cisco Linksys USB200M User Manual

Compact USB 2.0 10/100 Network Adapter
5. From the Network screen's Primary Network Logon drop-down box, select Client for Microsoft Networks.
6. Click the Identification tab. Enter the name of your computer in the Computer name field. Choose a name
that is different from the other computer names on the network.
7. Enter the name of your workgroup in the Workgroup field. The workgroup name should be the same
workgroup name used by all of the other PCs on the network.
8. If you wish, enter a description of your computer in the Computer Description field.
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows 98

Figure 3-23: Configuration Tab

Figure 3-24: Access Control Tab

18