Figure 3-19: Ready To Install Driver; Figure 3-20: Installation Complete - Cisco Linksys USB200M User Manual

Compact USB 2.0 10/100 Network Adapter
5. When Windows notifies you that it is ready to install the driver files, click the Next button to continue.
6. Windows will begin copying the driver files to your computer. If Windows asks you for the original Windows
CD-ROM, insert the CD-ROM, and direct Windows to the proper location for the CD-ROM (e.g., D:\). If you have
the Windows 98 setup files already installed in a directory, click OK, and enter C:\windows\options\cabs (if
"C" is the letter of your hard drive) in the windows that appears.
7. When Windows has completed copying the files, click the Finish button.
8. When asked if you want to restart your computer, remove the Driver CD from the CD-ROM drive, and click the
Yes button. If Windows does not ask you to restart your PC, click Start. Choose Shut Down, and select
Restart. Then click the OK button.
Congratulations! The installation of the Compact USB 2.0 10/100 Network Adapter is complete.
To enable file and printer sharing, go to the next section,
"Windows 98 Network Configuration."
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows 98

Figure 3-19: Ready to Install Driver

Figure 3-20: Installation Complete

16