Driver Installation For Windows Millenium; Figure 3-9: Hardware Found; Figure 3-10: Specify A Location - Cisco Linksys USB200M User Manual

Compact USB 2.0 10/100 Network Adapter

Driver Installation for Windows Millenium

NOTE: Do not click Cancel at any time during the installation
process. Doing so will prevent your driver from being properly
installed on your PC.
1. If you haven't already, start your computer.
2. Windows Millennium will automatically detect the Adapter connected to your PC. When the Add New
Hardware Wizard screen appears, insert the Driver CD into your CD-ROM drive, and select Specify the location
of the driver (Advanced). Click the Next button.
3. Select Search for the best driver for your device (Recommended). You MUST remove the checkmark from
the box next to Removable Media. Select Specify a location:, and enter D:\winME in the field provided. Then
click the Next button.
NOTE: Throughout this user guide, it is assumed that "D" is the
letter of your CD-ROM drive.
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows Millenium

Figure 3-9: Hardware Found

Figure 3-10: Specify a Location

10