Figure 3-25: Access Control Tab - Cisco Linksys USB200M User Manual

Compact USB 2.0 10/100 Network Adapter
9. From the Access Control tab, you can set the level of access that network users will have to this computer.
10. Click the OK button. Your system may ask you for your Windows 98 CD-ROM or the location of the Windows
98 installation files. If it does, direct Windows to the appropriate location (e.g., C:\windows\options\cabs or
D:\win98 if you have the Windows 98 CD-ROM and "D" represents your CD-ROM drive).
11. After Windows has copied the necessary files, the System Settings Change screen will appear. Remove all
disks and CDs from your PC, and click the Yes button to restart your PC. If you don't see this screen, simply
shut down Windows 98, and restart your PC.
12. A Logon screen will appear and require you to enter a User Name and Password. Make up a user name and
password (if you haven't already), and click the OK button. Do not click the Cancel button or press the Escape
[ESC] key, because this will prevent you from logging into the network. If the logon does not appear or if it
does not allow you to log on, refer to "Appendix A: Troubleshooting."
13. When you are at the Windows 98 desktop, double-click the Network Neighborhood icon. You should see one
icon for the entire network and the names of the other PCs on the network.
• If you can see your computer along with all the other computers on the network in Network
Neighborhood, then the Windows 98 network configuration is complete.
NOTE: Refer to the "Appendix A: Troubleshooting" if you run into any problems, such as:
• If you don't see anything at all in Network Neighborhood after pressing the F5 key on
your keyboard a few times to refresh the screen.
• If you only see your own computer in Network Neighborhood.
• If you see all computers on the network except yours after pressing the F5 key a few
times.
• If you only see computers that are running the same operating system as you and you
don't see any other computers.
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows 98

Figure 3-25: Access Control Tab

19