NETGEAR WG602v4 Reference Manual page 53

.
Figure 4-3
2. Under Advanced on the main menu, click Wireless Bridging. The Wireless Bridging screen
will display showing the default settings for the wireless access point.
3. Select the Wireless Multi-Point Bridging radio button to enable multi-point bridging.
4. Enter the MAC address of the first wireless access point and click Add. The AP's MAC
address and connection information will appear in the Wireless Accept Point List.
You can add wireless access points to the list for a total of four. (These wireless access points
must be configured for Multi-Point Bridging.)
Advanced Configuration
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
v1.0, June 2007
4-5