Display - Kenwood TM-V71A Instruction Manual

DIsPlAy

Indicator
10
< A Band >
Appears when there is a transmission band available. Blinks
when the cross-band repeater is ON (K type only).
Appears when there is an operation band available. Blinks
when the wireless remote control is ON (K type only).
Appears when the Tone function is ON.
Appears when the CTCSS function is ON.
Appears when the DCS function is ON.
Appears when the Shift function is set to plus.
Appears when the Shift function is set to minus.
Appears when the Reverse function is ON.
Appears when the ASC function is ON. Blinks when the ASC
function is performing an OK check.
Appears while in AM mode.
Appears while in Narrow FM mode.
Appears when the selected channel is registered while in
Memory Input mode.
Displays the Memory channel and Menu number.
Appears when the Memory Channel Lockout function is ON.
Appears while using High output power. Blinks when the
temperature protection circuit (transmit power save) turns on.
(K, E types only)
Appears while using Middle output power. Blinks when the
temperature protection circuit (transmit power save) turns on.
Appears while using Low output power.
Displays the operating frequency, Memory channel name, and
Menu.
Appears when receiving a busy signal.
Performs as an S meter when receiving a signal and displays
the selected power level while transmitting.
< B Band >
Description