Vgs-1 Optional Voice Guide & Storage Unit; Voice Announcements - Kenwood TM-V71A Instruction Manual

VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
When using the optional VGS-1 voice guide & storage unit, you gain access to the
voice recorder and voice announcement functions.
Note: The VGS-1 is sold depending upon area.

VOICE ANNOUNCEmENTS

When changing modes, frequencies, settings, etc., an audio voice will announce the
new information.
1 Enter Menu mode and access Menu 003 (ANN) {page 20}.
2 Set the announcement function to MANUAL, AUTO, or OFF.
• Refer to the tables below for announcements based on settings.
MANUAL:
A microphone PF key must be programmed as [VOICE] to use MANUAL voice
announcment.
Operation
While in VFO mode
While in MR mode
While in Call mode
While in Menu mode
Tone frequency setup
CTCSS frequency setup
DCS code setup
Announcement
Press [VOICE]:
Operating band frequency
Press [VOICE]:
"Channel" + Channel number + operating band
frequency
Press [VOICE]:
"Call channel" + operating band frequency
Press [VOICE]:
Menu number or setting value (some selections
have no voice announcement)
Press [VOICE]:
"Tone frequency" + frequency value
Press [VOICE]:
"CTCSS frequency" + frequency value
Press [VOICE]:
"DCS" + code value
75