Adjusting Sleep Mode - Lexmark 6500e User Manual

Minimizing your printer's environmental impact
Choose
Off
Note: Selecting Photo from the driver may disable Quiet
Mode and provide better print quality and full speed
printing.
On

Adjusting Sleep Mode

To save energy, you can decrease the number of minutes before the scanner enters Sleep Mode.
Available settings range from 1–240 minutes.
Using the Embedded Web Server
1
Type the scanner IP address in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can:
•
View the information on the scanner control panel home screen, or in the TCP/IP section under the
Network/Ports menu.
• Print a network setup page or menu settings page, and then locate the information in the TCP/IP section.
2
Click Settings > General Settings > Timeouts.
3
In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep Mode.
4
Click Submit.
Using the scanner control panel
1
From the home screen, navigate to:
> Settings > General Settings > Timeouts
2
Touch the arrows next to Sleep Mode to select the number of minutes you want the printer to wait before it
enters Sleep Mode.
3
Touch Submit.
To
Use factory default settings. This setting supports the
performance specifications of your scanner.
Reduce scanner noise.
•
Print jobs will process at a reduced speed.
• Scanner engine motors do not start until a document is
ready to print. There will be a short delay before the first
page is printed.
•
Fax sounds are reduced or disabled, including those made
by the fax speaker and ringer. The fax is placed in standby
mode.
•
The alarm control and cartridge alarm sounds are turned
off.
•
The scanner will ignore the Advance Start command.
64