Solving Copy Problems; Large Jobs Do Not Collate; Unexpected Page Breaks - Lexmark 6500e User Manual

Troubleshooting

Large jobs do not collate

These are possible solutions. Try one or more of the following:
M C
AKE SURE OLLATE IS SET TO
From the Finishing menu or Print Properties, set Collate to On.
Note: Setting Collate to Off in the software overrides the setting in the Finishing menu.
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of
images, and the number of pages in the job.
M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory or an optional hard disk.

Unexpected page breaks

I P T
NCREASE THE RINT
1
From the home screen, navigate to:
> Settings > General Settings > Timeouts > Print Timeout
2
Increase the Print Timeout value, and then touch

Solving copy problems

Copier does not respond
These are possible solutions. Try one or more of the following:
C
HECK THE DISPLAY FOR ERROR MESSAGES
Clear any error messages.
C
HECK THE POWER
Make sure the printer is plugged in, the power is on, and Ready appears.
Scanner unit does not close
Make sure there are no obstructions:
1
Lift the scanner unit.
2
Remove any obstruction keeping the scanner unit open.
O
N
IMEOUT VALUE
.
284